United States or Libya ? Vote for the TOP Country of the Week !
Place the wheel in position, the longer part of the spindle upwards, and move the standard about until the spindle is vertical in all directions. Scratch round the feet of the standard to mark their exact position, and solder the standard to the boiler. The top of the standard must now be bent slightly upwards or downwards until the spindle is held securely without being pinched.
Their market price is about four or five shillings a ton, but they are so light that it would take half a dozen trucks to hold a ton. They formerly burnt them for the sake of the solder, but now, by a new process, they are jointed without solder. The problem of the utilisation of the tins is one to which we would have to address ourselves, and I am by no means desponding as to the result.
The slightest leak will be betrayed by a string of bubbles coming directly from the point of leakage. Mark any leaks by plain scratches, solder them up, and test again. The boiler should then be quite filled with cold water, and heated gradually until the pressure gauge has risen to over the working pressure. There is no risk of an explosion, as the volume of the water is increased but slightly.
"You see, an iron kettle is such a weight", he explained, "and the last time we took one of those rubbishy sixpence-halfpenny tin ones the solder all melted directly we put it on to the fire, and the spout dropped off. We can sling the milk-can on a stick and prop it over the fire, and it does splendidly."
And now that hateful Sammy's found it and brought it back, and I've sent him your solder, and Debby's promised me she wouldn't tell you about the pork, and I I'm no better than the rest of 'em that lie and lie and don't let their men-folks know!" Letty was sobbing bitterly, and David drew her into his arms and laid his cheek down on her hair. His heart was aching too.
The impact of the blow was such that the leaden solder which filled the interstices of the segments of the turret was squeezed out from between the plates in curly strips, like icing from between the layers of a misused birthday cake. Back within the main works we saw where a shell had bored a smooth, round orifice through eight meters of earth and a meter and a half of concrete and steel plates.
By pressing hard on a knife he could make a good groove in the metal. It was not as soft as the solder, but seemed to be some simple alloy containing a good percentage of lead. What could it be concealing? Probing carefully with the point of the knife he covered the bottom in a regular pattern.
We fought for three weeks a most desperate battle, and might in the end have been victorious, had not our last antagonist, at the very close of his case, pointed out no less than seventy-three fatal errors in the parliamentary plan deposited by the unfortunate Solder.
Use powdered resin by preference as flux for an iron kettle, as it does not cause the rusting produced by spirit of salt. If the latter is used, wipe over the solder with a strong ammonia or soda solution, in order to neutralize the acid.
They had moulded a new set of balls of harder material, solder it should have been, but they had none. They chanced, however, to be in possession of what served the purpose equally well the old "plate" that had often graced the field-cornet's table in his better byegone days of the Graaf Reinet.
Word Of The Day