Vietnam or Thailand ? Vote for the TOP Country of the Week !
Updated: May 19, 2025
Make the rivet holes a good fit, and drill the two parts to be held together in one operation, to ensure the holes being in line. Rivets will not close properly if too long. Dies for closing the rivet heads may be bought for a few pence. Soldering, etc. Joints not exposed directly to the furnace flames may be soldered with a solder melting not below 350 degrees Fahr.
The protective casing seemed to be soldered to the base, but there must be stronger concealed attachments because it would not move even after he carefully scratched away some of the solder at the base. Therefore the answer simply had to be on the sixth side. "Over here, Mikah," he called, and the man detached himself reluctantly from the warmth of the stove and shuffled up.
Now connect the post of the other contact slide to one of the posts of the detector and the other post of the latter with the binding post a, then connect the binding post b to the ground wire and solder the joint.
Sometimes it is a solder uniting stone with bronze; sometimes it exists in thin sheets, which may have been worn as ornaments. In Phoenicia Proper it has been chiefly met with in the shape of coffins, which are apparently of a somewhat late date. They are formed of several sheets placed one over the other and then soldered together.
The one political idea of his life was to solder Italy firmly to Germany. And that is still the desire of your aristocracy. Fight with Austria, if you must, but Italy and Germany must not become armed enemies."
Filigree flowers are then to be added, and the whole soldered into place in a most primitive manner, banking the coals in the shape of a small furnace, so that the coals may lie thickly around the circumference, and when the solder "flows about as if undulating," the artist is to sprinkle it quickly with water, and take it out of the fire.
In other cases, finding that the child could not be made to comprehend anything, the sagacious heads of the household, on the supposition that its brain was too hard, tortured it with hot poultices of bread and milk to soften it. Others plastered over their children's heads with tar. Some administered strong doses of mercury, to "solder up the openings" in the head and make it tight and strong.
There was a channel in the solder where the tip had rested. Rick tried to replace the wire, but the area was too small for his hand. When he had wired the contact originally, the chassis had been sitting in the open on his workbench. Now it was encased in aluminum, except on the top where he had removed the cover plate. He was conscious suddenly of a faint hiss.
Grant knew that the ring could not be made of fine, solid gold, for the price his neighbour had agreed to take. And he knew, also, that in manufacturing it, his neighbour, if he took the order, would fill up the centre of the ring with solder a common practice. On the spur of the moment, he determined to do the same thing, and therefore replied "Well, I suppose I must work as low as he does."
Have you heard what she did in the Congo?..." As the men came, talking, smiling, wiping their eyes, they were caught by Grogoff's voice. They stood there and listened. Soon they began to nod their heads. I heard them muttering that good old word "Verrno! Verrno!" again. The crowd grew. The men began to shout their approval. "Aye! it's true," I heard a solder near me mutter.
Word Of The Day
Others Looking