Vietnam or Thailand ? Vote for the TOP Country of the Week !
The wheels are made with mild steel spokes, which are secured by metal straps in the recesses cut in the annular flanges on the boss, and by a taper bolt or rivet through the tire and rim. These spokes can be easily taken out and renewed when necessary by any unskilled person in a few minutes.
Thus, the 500 threads would be arranged side by side, perhaps for a width of 45 to 46 in., and bridging the gap between the flanges of the beam; the latter is thus, to all intents and purposes, a very large bobbin upon which 500 threads are wound at the same time, instead of one thread as in the ordinary but smaller bobbin or reel.
Machinery, indeed, rolled the quadrant-shaped sections of each column and riveted their flanges together with hydraulic hammers; great steam-derricks dropped each on its appointed seat; and the main tasks of manual labor in either building were painting, glazing, floor-laying and erecting the ground-wall of masonry, from five to seven feet high, that fills in the outer columns all round to a level with the heads of theorists who, holding that la propriété c'est le vol, assert the propriety of theft.
The cylinder has flanges cast on its sides, upon which it rests on the bottom frame, and it is sunk between the sides of the frame so as to bring the centre of the cylinder in the same plane as the centre of the screw shaft. The opening left at the guides for the reception of the guide blocks is 6 inches deep, and the breadth of the bearing surface is 11 inches.
As soon as he got home he would go to the refrigerator for a piece of raw beefsteak for his swollen eye. Darn that eye anyway! He would have to hibernate up in the woods till it became more presentable. Far behind him in the mist somewhere the yard-engine was still coughing; across the water came a subdued squeal of protesting flanges, followed by the distant bang of shunted box-cars.
Into these holes aluminum cups fitted snugly, and the iron flanges, when the doors were closed, fitted so closely over the cups that it was impossible for the animals to obtain food from them. Ground plan of multiple-choice apparatus in experiment room A. Scale 1/60
One benefit of inclining the rails in this way, and coning the tires, is that the flange of the wheels is less liable to bear against the sides of the rail, and with the same view the flanges of all the wheels are made with large fillets in the corners. Wheels have been placed loose upon the axle, but they have less stability, and are not now much used.
This rapid traverse, combined with the rotation of the rolls, enables the yarn to be securely built upon a paper or wooden tube; no flanges are required, and hence the initial cost as well as the upkeep of the foundations for rolls is much below that for bobbins. Charles Parker, Sons & Co.
It is easy to imagine the iron flanges that sweep the snow from the track to be rammers for a combat at close quarters, and the canvas hangers that shield the brushes, torpedo-nets for defence against a hidden enemy.
Q. Are there several lengths of screw shaft? A. There are. Q. How then are these secured to one another? A. The best mode of securing the several lengths of shaft together is by forging the shafts with flanges at the ends, which are connected together by bolts, say six strong bolts in each, accurately fitted to the holes. End of the Screw Shaft of Correo, showing the mode of receiving the Thrust.
Word Of The Day