Vietnam or Thailand ? Vote for the TOP Country of the Week !
Updated: July 13, 2025
The boy then went to conduct an incomprehensible monologue in the corner, and the tailor pulled out a number of slotted arms terminating in little discs, pulling them out until the discs were flat against the body of Graham, one at each shoulder blade, one at the elbows, one at the neck and so forth, so that at last there were, perhaps, two score of them upon his body and limbs.
Then, once more, the breech-block was slotted home, and the trailing electric wires unreeled to lead to the bomb-proof. Tom Swift took one last look through the telescope sights of his giant cannon. He changed the range slightly by means of the hand and worm-screw gear, and then, with the others, ran to the shelter of the cave.
She had no business down here where the men were. That was just like a fool girl, always running after . She paused at his bench. "Shade," she said, bending close so that he might hear the words, "I got leave to come in and ask you to make me a thing like this see?" showing a pattern for a peculiarly slotted strip of metal.
Three hundred years ago della Porta knew the camera obscura, and but for the lack of a sensitive plate would have made photographs. A box, thoroughly light-tight, slotted inside to receive plates, covered with black, and glued tight, a needle hole made by a number 10 needle in a thin sheet of paper and you have the apparatus for lensless photography.
One end of this should be filed or turned down to fit the hole drilled for it; the other should be slotted to fit the lever accurately. The rocking lever, RL, which should be of steel, is slotted at each end to slide on the pins in the forks, and bored for the pivot pin, which, like those in the forks, should be of hardened steel wire.
Most machines have weighted pressure feed, but this having steel springs adjustable by a screw and hand wheel, a heavy or light pressure can be applied according to the work done or size of molding. The cutter-heads are square and slotted so that any style of molding can be stuck by putting cutters on all sides of the head, thus equalizing the cost and lessening the power.
The series of matrices thus assembled in line forms a line matrix, or, in other words, a line of female dies adapted to mold or form a line of raised type on a slug cast against the matrices. After the matrix line is composed, it is automatically transferred to the face of a slotted mold into which molten type-metal is delivered to form a slug or linotype against the matrices.
On the crank, F, is secured an eccentric, that works within the slot of the slotted lever, o squared, during the revolution of the crank, F, and in this manner imparts the requisite motion to the slide valve, o, to admit the steam into the cylinder, g, alternately between the pistons, k and k', and at the ends of said cylinder, g, so as to alternately force the pistons, k and k', from and toward each other, and thus, in combination with the vibratory motion of the truss, i, impart a rotary motion to the driving-wheels, e and f.
There was a rattle as the chain fell from the slotted slide on the door, and Alice opened the portal, to disclose the smiling and yet rather worried face of Russ. The girls had come to know him well enough to call him by his first name, and he did the same to them. It might not be out of place to say that Russ admired Ruth very much. "I'm awfully sorry about what happened," began Russ.
In the French guns, and our modern ones, the bore is continued to the rear extremity of the piece, the breech end forming an intermittent screw, that is, a screw having the threads intermittently left and slotted away.
Word Of The Day
Others Looking