United States or Spain ? Vote for the TOP Country of the Week !
Subspace Radio Test Ninety-Five I think. How do you read me, Control Six?" The reply was highly unorthodox. It was a wild yell, followed by words not directed at Deston at all. "Captain Reamer! Captain French! Captain Holloway! ANYBODY! It's the Procyon! The PROCYON, that was lost a year ago! Unless some fool is playing a dumb joke." "It's no joke I hope."
I could see no reason for Sprague's having needed a reamer for his little job, however, and this morning I was lucky enough to get proof that Miles himself had purchased it at a hardware store on the Tuesday before Nita's murder." "How did he connect the lamp cord with the dining room bell?" Strawn puzzled. "These modern houses don't have exposed wiring "
But if you will examine the jewel hole," he suggested, "you will see that Miles had to enlarge it considerably, using a reamer, which I found in the tool chest in the basement, along with all the apparatus Sprague had bought for installing Nita's alarm bell.
He could tell just when the drill had cut into hard rock at an acute angle and was running out of the perpendicular to follow the softer stratum. His judgment appeared infallible as to whether he ought to send down a reamer to straighten the kink. All Dave knew was that a string of tools far underground was jerking up and down monotonously.
If you meditate on your dear old Swami then you will become pure like your laundry... " Can't go at all? REAM YOURSELF with Reverend Mune's Original Korean Holistic Reamer. All Natural, Heavy Metal, Available in decorator colors." We know that if you will come to one or two of our free sessions we can hook you into a long term program which will cost you thousands!... How do we manage this?
Don't cut the tube into lengths before bending, as short pieces are more difficult to handle. When a piece sufficient for a tube has been bent, cut it oft, and remove the resin by heating. The fitting of the tubes is an easy matter, as the holes are circular. Pair off a tube with its holes and number it. A fluted reamer will be found invaluable for enlarging them to the correct size.
"Seems to me I recognize that melojious voice." A man stepped from the gloom with masterful, arrogant strides. "'Lo, Hart," he said. "Can you lend me a reamer?" Bob knew he had come to spy out the land and not to borrow tools. "Don't seem to me we've hardly got any reamers to spare, Dug," drawled the young man sitting on the porch floor. "What's the trouble? Got a kink in yore casin'?"
Big houses, with their many locks, are usually provided with a master key, and Miles undoubtedly used that one to gain entrance into my room after midnight Saturday morning." "Where did you find the vise?" Strawn asked. "In the tool chest right here, where he had also placed the reamer he had bought.
As a rule, if there is too much air, the flame will burn with a loud roaring noise, and is liable to fire back. The nipple should then be opened out with a small reamer the tang of a small file, ground to a long taper point, makes an admirable tool for this purpose.
The two holes for any one tube should be bored independently, with a drill somewhat smaller than the tube, and be opened to a good fit with a reamer or broach passed through both holes to ensure their sides being in line. Taper the tubes 2-7/8 inches long each slightly at one end, and make one of the holes a bit smaller than the other.
Word Of The Day