Vietnam or Thailand ? Vote for the TOP Country of the Week !
Updated: May 23, 2025
Brass rings A calked into the gland box encircle the shaft on either side of the annular steam space S. As the clearance between the turbine spindle and the rings A is in a measure instrumental in determining the amount of steam required to maintain a required pressure inside the chamber, it is obvious that this clearance should be minimum.
So much are the bussu-leaves prized for thatch, that the Indians, in parts where this palm does not grow, often make a canoe voyage of a week to procure them! The spathe which contains the flowers is also put to many uses. It is of a long spindle shape, of fibrous, cloth-like texture, and brown colour. The Indians use it as cloth.
In slow moving engines the bucket valve is generally of the spindle or pot-lid kind, but butterfly valves are sometimes used. The foot and delivery valves are for the most part of the flap or hanging kind. These valves all make a considerable noise in working, and are objectionable in many ways.
I heard the sharp click of this against the spokes of the wheel, then the hum of the wheel, the buzz of the spindles as the twisting yarn was teased by the whirl of its point, then a step backwards, a pause, a step forward and the running of the yarn upon the spindle, and again a backward step, the drawing out of the roll and the droning and hum of the wheel, most mournfully hopeless sound that ever fell on mortal ear.
Two ports, at opposite ends of a diameter, give better results than a single port, as equalizing the pressure on the vanes, so that the spindle is relieved of bending strains. Their combined area must not, however, exceed that of the single port, if one only be used.
The spinning is accomplished by revolving the spindle between the palms of the hands, some being so expert in administering momentum that the top "goes to sleep," before the eyes of the smiling and exultant player. Dr. Roth chronicles the fact that the piercing of the gourd to produce the hum has been introduced during recent years.
In the garden scene, she sang the first bars of the music absent-mindedly, dusting and folding her little cape, stopping when it was only half folded to stand forgetful a moment, her eyes far off, gazing back into the preceding act. Awaking with a little start, she went to her spinning-wheel, and, with her back to the audience, arranged the spindle and the flax.
Halfway along the sides bore holes to fit the spindle. Make a mark 1 inch from one end of the spindle, a second l/8 inch farther away from the first than the length of the reel. Drill 3/16-inch holes at the marks. Select two wire nails which fit the holes, and remove their heads. Next cut two 1/4-inch pieces off a tube which fits the spindle.
The heavy posts which had supported the wooden roller still remained, but the iron spindle had been dragged from its socket and lay a few paces from the well, rusty, discolored, and forgotten. Robert Audley leaned against one of the moss-grown posts and looked down at my lady's face, very pale in the chill winter twilight.
We waited without comment while the smoke crept by degrees towards the little white spindle on the tip of the point, now and again catching a gleam of the sun's rays from off the glass of the lantern. And presently, against the white lather of the lake, I thought I caught sight of a black nose pushed out beyond the land. Another moment, and the tug itself was bobbing in the open.
Word Of The Day
Others Looking