Vietnam or Thailand ? Vote for the TOP Country of the Week !
Updated: June 18, 2025
On the 1st of November he signed an agreement with the same Pelliccia involving the purchase of a vast amount of marble, whereby the said Pelliccia undertook to bring down four statues of 4-1/2 cubits each and fifteen of 4-1/4 cubits from the quarries where they were being rough-hewn.
Nevertheless, such is the fact. In 1565 the contract allowance for victualling was 4-1/2d. a day for each man in harbour, and 5d. a day at sea. There was also an allowance of 4d. a man per month at sea and 8d. in harbour for 'purser's necessaries. Mr.
Q. Will you describe the valve and valve casing? A. The length of the valve casing is 16-1/2 inches, and its projection from the cylinder is 3-1/2 inches at the top, 4-1/4 inches at the centre, and 2-1/2 inches at the bottom, so that the back of the valve casing is not made flat, but is formed in a curve.
What he earned would hardly be considered a "living wage" in these days. But according to Colerus, his first biographer, who enquired of the householders with whom Spinoza lodged, his day's maintenance of often cost no more than 4-1/2d. Various incidents proved his total indifference to money, except as far as needed to "provide things honest in the sight of all men."
The first flue past the actual furnace shown with ordinary dead-plate, raking fire-bars, ashpit, fire-door, and ashpit door for regulating draught has walls 4-1/2 in. thick; above, smaller bricks, 3 in. wide; but in a larger apparatus, 9 in. and 4-1/2 in. respectively would be required. The quarries between flues and air spaces are 24 in. by 24 in. by 3 in., with rebated joints.
Height at shoulders 3 6 3 0 Girth around shoulders 3 11 3 3-3/4 Length from nose to root of tail 5 10-1/4 4 3-1/2 Length of ears 0 4-3/4 0 5 Length of tail 0 4-1/2 0 4-1/2 Length of horns around curve 2 9 0 11-1/2 Distance across from tip to tip of horns 2 5-1/2 Circumference of horns at base 1 4 0 6
The balance support, B, and the pivot piece, C, are 2-1/2 and 2-7/16 inches high respectively. Run a hole vertically through C and the baseboard for the pivot, which should be 4-1/2 inches long, so as to project 1 inch when driven right home. Take some trouble over getting the holes in L and C quite square to the baseboard, as any inaccuracy will make the lever twist as it moves.
In cock A growth continued till the end of the following March, when the longest feathers, the central rectrices, 2 feet 4-1/2 inches long. The effect of stroking in cock B was to pull out from time to time one of the growing feathers.
The loss of the other Allies, on a basis of tonnage, was as follows: France, 7 per cent; Russia, 5 per cent; and Italy, 4-1/2 per cent. How heavy the hand of war has fallen upon neutrals may be judged from a comparison of sea casualties.
From the scale of distances on the map the horizontal distance between any two contours can be found. For example: On the map the horizontal distance between D and E is 90 yards, or 270 feet. The vertical distance is 20 feet the V. I. of the map. The slope then is 20/270 = 1/13.5 = 7-1/2% = 4-1/2°, in all of which different ways the slope can be expressed,
Word Of The Day
Others Looking