Vietnam or Thailand ? Vote for the TOP Country of the Week !
Updated: May 7, 2025
On this table boiler ends up to 8 ft. in diameter can be turned up, the turning tool being carried by a slide rest, which is mounted on the main baseplate, as shown, and which is adjustable vertically and radially. For cutting out flue holes a steel boring head is employed, this head having a round end which fits into the center of the table.
Jason pushed a sharp chisel between the upper case and the baseplate where he had removed the solder, and when he leaned on it the case shifted slightly, held down only by its own weight. From the entrance to the enclosure he shouted to the group huddled in the distance. "Come on back this job is almost finished."
Their food still consisted only of krenoj and Jason shuddered while he admitted that he was actually growing used to them. The following morning, under the frightened gaze of his guards, Jason tackled the underside of the baseplate. He had been thinking about it a good part of the night and he put his theories to the test at once.
The weather remained cold and the ice refused to melt until Jason had the pit ringed with smoking oil stoves. Water began to run down into the pit and Mikah went to work bailing it out, while the gap between the hood and the baseplate widened. The melting continued for the rest of the day and almost all of the night.
As will be seen from our engraving, the pillar which supports the radial arm is mounted on a massive baseplate, which also carries a circular table 6 ft. in diameter, this table having a worm-wheel cast on it as shown. This table is driven by a worm gearing into the wheel just mentioned.
Word Of The Day
Others Looking