Vietnam or Thailand ? Vote for the TOP Country of the Week !
Updated: May 13, 2025
It may be of interest, however, to mention some of its dimensions and electrical characteristics, quoting again from Mr. Clarke: "The field-magnet had eight solid cylindrical cores, 8 inches in diameter and 57 inches long, upon each of which was wound an exciting-coil of 3.2 ohms resistance, consisting of 2184 turns of No. 10 B. W. G. insulated copper wire, disposed in six layers.
I have now to draw your attention to a new motor of my own invention, of the weight of 124 lb., which, at 1,550 revolutions, gives 31 amperes and 61.5 volts at terminals. The mechanical horse power is 1.37, and the coefficient 373. Ohms. Armature resistance 0.4 w. Field-magnet resistance 0.17 w. Insulation resistance 1,500,000 w.
The motor had its field-magnet circuit in permanent connection as a shunt across the rails, protected by a crude bare copper-wire safety-catch. A switch in the armature circuit enabled the motorman to reverse the direction of travel by reversing the current flow through the armature coils.
The field-magnet circuits of the dynamos were connected in multiple with a separate energizing source; and the field-current; and strength of field, were regulated to maintain the required amount of electromotive force upon the supply-mains under all conditions of load from the maximum to the minimum number of lamps in use, and to keep the electromotive force of all machines alike."
This arrangement was generally satisfactory, but the resistance-boxes scattered about the platform and foot-rests being in the way, Edison directed that some No. 8 B. & S. copper wire be wound on the lower leg of the motor field-magnet.
Word Of The Day
Others Looking