Vietnam or Thailand ? Vote for the TOP Country of the Week !
Updated: May 11, 2025
On each side of the spindle a long plug should then be driven into the back piece, as our illustration shows. These should be far enough apart to allow the spindle to pass easily between them. The spindle being lowered between the plugs is caught finely on the tip of the catch-piece.
The wire noose should then be attached to the draw-string about six inches above the catch-piece. The pen should now be constructed as previously directed. Its entrance should be on the side furthest from the springer, and should be so built as that the peg in the ground shall be at the back part of the enclosure. The pen being finished, the trap may be set.
A catch piece about three inches long, a bait stick of about six inches, and a stout crotch of the proportionate size shown in our illustration, a glance at which will make the setting too clear to need description. Be careful that the bait stick is set fine and rests just beneath the tip of the catch-piece so that a mere touch on the bait will release it.
Word Of The Day
Others Looking