Vietnam or Thailand ? Vote for the TOP Country of the Week !
The spring of the exhaust valve was not placed round the stem in the usual way, but at the end of a short lever, away from the heat of the exhaust gases. The cylinders were of cast steel, the crank case of aluminium, and ball-bearings were fitted to the crankshaft, crank pins, and the rotary blower pump.
The connecting rods, of I section, are very short and rigid, carrying floating bronze bushes which fit the piston pins at the small end, and carrying an oil tube on each for conveying oil from the crank pin to the piston pin. The crankshaft is of chrome nickel steel, carried on seven bearings.
The two small pistons of the pump take fresh oil from a tank located in the fuselage of the machine; one of these delivers oil to the cam shaft, and one delivers to the crankshaft; this fresh oil mixes with the used oil, returns to the base, and back to the main large oil pump cylinders.
Another interesting type is the Burlat rotary, in which both the cylinders and crankshaft rotate in the same direction, the rotation of the crankshaft being twice that of the cylinders as regards speed. This engine is arranged to work on the four-stroke cycle with the crankshaft making four, and the cylinders two, revolutions per cycle.
The gill-netters hung on the seiner's heels, because where the purse seine could get a haul so could they. And the carriers and buyers sought the fishermen wherever they went, to buy and carry away their catch. Folly Bay suffered bad luck from the beginning. Gower had four purse-seine boats in commission. Within a week one broke a crankshaft in half a gale off Sangster Island.
This engine operates upon a six-stroke cycle, a rather rare arrangement for internal combustion engines of the electrical ignition type; this is done in order to obtain equal angular intervals for the working impulses imparted to the rotating crankshaft, as the cylinders are arranged in groups of seven, and all act upon the one crankshaft.
Stolon, rhizome and culm became words replacing crankshaft and piston in the popular vocabulary; the puerile reports Gootes fabricated under my name as the man responsible for the phenomenon were syndicated in newspapers from coast to coast, and a query as to rates was received from the Daily Mail.
In this the cast-iron cylinders were made very thin, and were secured to the crank case by bolts passing through lugs cast on the outer ends of the cylinders; the crankshaft was made hollow, and holes were drilled through the webs of the connecting-rods in order to reduce the weight.
The hauling gear with which the tug is fitted consists of a pair of condensing engines with cylinders 14.17 inches in diameter and 23.62 inches stroke, the crankshaft carrying a pinion which gears into a spur wheel on an intermediate shaft, this shaft again carrying a pinion which gears into a large spur wheel fixed on the shaft which carries the clip drum.
A one-hundred-horse-power motor weighed only two hundred and sixty pounds, and it was a splendid type for fast work. Briefly, the power generated by the explosions in the cylinders, operating against two centers of pressure, gave a rotary motion to the cylinders and crankcase, revolving around a stationary, hollow crankshaft.
Word Of The Day