United States or Saint Martin ? Vote for the TOP Country of the Week !
The ovolo has a convex profile, and is sometimes called a quarter-round; it is enriched with an EGG-AND-DART ornament The spiral roll may be conceived as a long cushion, whose ends are rolled under to form the VOLUTES. The part connecting the volutes is slightly hollowed, and the channel thus formed is continued into the volutes. Above the spiral roll is a low abacus, oblong or square in plan.
The central section of this window has ninety-six rectangular panes with twenty-four keystone-shaped and two quarter-round panes forming the round top. The narrow side windows have fifteen-paned upper and twelve-paned lower sashes.
The windows of Christ Church are larger still and particularly interesting because of the heavy central muntin to strengthen the sash. On the first story the lower sashes have twenty-four panes and the upper ones eighteen rectangular panes with sixteen keystone-shaped and two quarter-round panes to form the semicircular top.
If the room is wainscoted the spook will have all the sea room necessary in his trap, for it will extend from just below the molding on the top of the wainscoting to the floor behind the strip of quarter-round. . . . It is next to an impossibility to detect these traps by examining in the cabinet.
Now in the year 1524, after M. Baldo Magini had caused Antonio, the brother of Giuliano da San Gallo, to build in the Madonna delle Carceri, in the town of Prato, a tabernacle of marble with two columns, architrave, cornice, and a quarter-round arch, Antonio resolved to bring it about that M. Baldo should give the commission for the picture which was to adorn that tabernacle to Niccolò, with whom he had formed a friendship when he was working in the Palace of the above-mentioned Cardinal dal Monte at Monte Sansovino.
Much of this can easily be corrected by closing the cracks, usually found in older houses, between flooring and walls at the baseboards. Generally quarter-round molding, carefully fitted and securely nailed is sufficient but occasionally wide, uneven cracks have to be closed with oakum, putty, or crack filler before the molding is put in place.
Word Of The Day