United States or Tokelau ? Vote for the TOP Country of the Week !
The high pressures required for the economical use of transmission lines necessitates the employment of transformers at each end of the line; namely, step-up transformers at the transmitting end, to raise the voltage delivered by the generators, and step-down transformers, at the receiving end, to lower it for use in the various translating devices.
The limit to which this alternating transmission can be economically carried has not yet been definitely settled, but it is quite possible even now to transmit economically from the center of any of our large cities to the distant suburbs, by means of high potential alternating currents, distributing the current from the subcenter distribution by means either of the alternating current itself and large transformers for a block or district or else, if the territory is thickly settled, by means of a system of low-tension mains and feeders, the direct current for this purpose being obtained through the agency of rotary transformers.
Since the diagram shows only one amplifier and one radio frequency transformer, it is consequently a one step amplifier; however, two, three or more, amplifying tubes can be connected up by means of an equal number of radio frequency transformers when you will get wonderful results.
Tuning coils, sometimes called transmitting inductances and oscillation transformers, are of various types. The simplest kind is a transmitting inductance which consists of 25 or 30 turns of copper wire wound on an insulating tube or frame.
It is the mutual induction that takes place between two coils of wire which makes it possible to transform low voltage currents from a battery or a 110 volt source of current into high pressure currents, or high potential currents, as they are called, by means of a spark coil or a transformer, as well as to step up and step down the potential of the high frequency currents that are set up in sending and receiving oscillation transformers.
Everything came to a halt until Hiroshito discovered thermic induction, and we were able to elevate temperature almost indefinitely through a process similar to the induction of high electric potentials by means of transformers and the Ruhmkorff coil. "Hiroshito wasn't looking for a detonating ray and didn't have time to bother with it, but I started a series of experiments with that end in view.
By using a receiving set having a three step radio frequency and a three step audio frequency, that is, a set in which there are coupled three amplifying tubes with radio frequency transformers and three amplifying tubes with audio frequency transformers as described under the caption A Radio Frequency Transformer Receiving Set, you can use a loop aerial in your room thus getting around the difficulties if such there be in erecting an out-door aerial.
It is already claimed that with the use of currents of high voltage for carrying the power, and "step-down transformers" converting these into a suitable medium for the driving of machinery, a fairly economical transmission can be ensured along a distance of 100 miles.
By using a receiving set having a three step radio frequency and a three step audio frequency, that is, a set in which there are coupled three amplifying tubes with radio frequency transformers and three amplifying tubes with audio frequency transformers as described under the caption A Radio Frequency Transformer Receiving Set, you can use a loop aerial in your room thus getting around the difficulties if such there be in erecting an out-door aerial.
These were obtained, Mr. Marconi has himself told us, "by means of a generating plant consisting of an alternator capable of an output of about 25 kilowatts, which, through suitable transformers, charged a condenser having a glass dielectric of great strength."
Word Of The Day