United States or Thailand ? Vote for the TOP Country of the Week !
The stirring of the ore over the hearth is effected by means of carriages fixed in the centre of the furnace and having laterally projecting arms, carrying stirrers, that move along the hearth and turn over the pulverised ore.
The fields were tenanted with thrashing crews, the men diminished by distance to pygmies, the long belt of the engine flapping and shining like a ribbon in the flaming sunlight. The freight cars on the accommodation train jostled and rocked about and heaved up laterally, till they resembled a long line of awkward, frightened, galloping buffaloes.
The pea is meant for it and for no one else. In refusing the few bites that would lead to the death of the seed, it has no intention of limiting its destruction. It abstains from other motives. Let us remark that the peas touch laterally, and are pressed one against the other, so that the grub, when searching for a point of attack, cannot circulate at will.
A fence formed of wooden lattice inclosed this barrack, which was lighted on the outside by lamps placed four feet apart, and the windows were placed laterally. The pavilion next to the sea consisted of three rooms and a hall, the principal room, used as a council-chamber, being decorated with silver-gray paper.
The vulva, or external part of the female sex organs, is a mouth shaped aperture, located laterally between the forward part of the thighs. In shape, size and structure, it much resembles the external parts of the mouth proper. It begins just in front of the anus, and extends forward above the pubic bone and a little ways up the belly. Its entire lateral length is about four or more inches.
Lime is diffused laterally through the soil in a very slight degree. If a strip of sour land is protected by canvas, so that no dust from lime applied to uncovered land can blow upon it, a seeding to clover will show that plants a few inches from the edge of the limed area will fail to start thriftily and may die before their roots reach the lime.
To get the hole in the casing correctly situated and sloped, begin by boring a hole straight through, 1/4 inch away laterally from where the steam discharge hole will be, centre to centre, and then work the walls of the hole to the proper angle with a circular file of the same diameter as the nozzle piece, which is then sweated in with solder.
AS SKIRMISHERS, GUIDE CENTER, MARCH. Raise both arms laterally until horizontal; swing both simultaneously upward until vertical and return to the horizontal; repeat several times. ASSEMBLE, MARCH. Raise the arm vertically to its full extent and describe horizontal circles.
Word Of The Day